90° vertical adapter for the Bosch Smart System display mount (eBike). 
 
Available with or without a hidden AirTag mount.
 
The mount is rigid and cannot be rotated. This makes both the Komoot app and the Bosch Flow app easy to read.
 
The adapter is simply installed between the existing attachment and the display mount.
 
Because the Bosch SmartphoneGrip clamps from one side only and is therefore not centered, a slight offset may occur with wider or narrower smartphones (for example, an iPhone 14 with case). With a phone width similar to an iPhone 14 (with case), this is not visible.
 
 
 
The mount is not compatible with the Bosch eBike System 2. (Smart System only)
 
 
 
The Bosch display mount (for Kiox 300, 500, or SmartphoneGrip) is not included, but is required for installation.
 
 
 
Bosch display mount Smart System BDS3210 (rear connection)   <-- recommended by us!
 
 
Bosch display mount Smart System BDS3250 (front connection)
 
 
 
 
An additional cable may also be required if you use a Bosch SmartphoneGrip, for example:
 
 
 
Bosch display cable BCH3611
 
 
 
 
!!!  WARNING  !!!
Before starting work, the system should be switched off
 
and the battery removed for safety.
 
 
 
Package contents:
 
 
 
3D-printed 90° adapter (with or without AirTag mount)
 
 
2 or 5 matching screws (AirTag) 
 
 
Instructions as a PDF are sent with the invoice (PDF by email)